はじめに

Replacing the keyboard is an intermediate level repair. Following the instructions carefully will help you successfully replace your keyboard.

Locate the battery locks on the bottom of the laptop. Slide the right lock outwards, until it locks into place. Slide and hold the left lock outwards and hold it in place.
  • Locate the battery locks on the bottom of the laptop.

  • Slide the right lock outwards, until it locks into place.

  • Slide and hold the left lock outwards and hold it in place.

コメントを追加する

While holding the lock in place, slide the battery out towards you.
  • While holding the lock in place, slide the battery out towards you.

コメントを追加する

Using a #1 Phillips screwdriver, remove the 5.8 mm screw in the battery slot.
  • Using a #1 Phillips screwdriver, remove the 5.8 mm screw in the battery slot.

コメントを追加する

Use a plastic opening tool to pry off the plastic panel above the keyboard.
  • Use a plastic opening tool to pry off the plastic panel above the keyboard.

コメントを追加する

Unscrew the four 3.7 mm screws at the top of the keyboard using a #1 Phillips screwdriver. Unscrew the four 3.7 mm screws at the top of the keyboard using a #1 Phillips screwdriver.
  • Unscrew the four 3.7 mm screws at the top of the keyboard using a #1 Phillips screwdriver.

コメントを追加する

Slowly lift the keyboard out, up and towards the screen.
  • Slowly lift the keyboard out, up and towards the screen.

  • Do not try to remove the keyboard completely because it is still attached to the motherboard.

コメントを追加する

Using a plastic opening tool, flip the ZIF connector up to release the ribbon and the keyboard.
  • Using a plastic opening tool, flip the ZIF connector up to release the ribbon and the keyboard.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Jerry Wakai

メンバー登録日: 2013年01月31日

302 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 7-7, Maness Winter 2013 Cal Poly, Team 7-7, Maness Winter 2013人のメンバー

CPSU-MANESS-W13S7G7

5 メンバー

6のガイドは作成済み

コメント1件

Nice little guide. The only thing I can really think to add would be on the last part for those of us who are super-paranoid about breaking something. If you could add a picture of what the ZIF connector looks like after it's opened would help some.

I appreciate the guide, thanks. :)

Christopher Tidwell - 返信

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 7

過去 30 日: 27

今までの合計 3,996