メインコンテンツにスキップ

はじめに

This guide is useful for replacing a broken hard drive on your laptop. All of your computer's important data is stored on the hard drive. In this replacement guide, you will remove the hard drive cover to access the hard drive.

Note: Before starting any removal or installation, remember to turn off the device and to remove it from the power source.

パーツ

パーツは指定されていません。

  1. Remove the two 7 mm screws with a Phillips#00 Screwdriver
    • Remove the two 7 mm screws with a Phillips#00 Screwdriver

  2. Using a flat head from a plastic opening tool to lift open the cover.
    • Using a flat head from a plastic opening tool to lift open the cover.

  3. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  4. Remove the four 6mm screws with the Phillips #00 screwdriver.
    • Remove the four 6mm screws with the Phillips #00 screwdriver.

  5. Pull out black tab located on the hard drive to slide it out.
    • Pull out black tab located on the hard drive to slide it out.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Mike Kennedy

メンバー登録日: 2013年04月18日

133 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 2-21, Maness Spring 2013 Cal Poly, Team 2-21, Maness Spring 2013人のメンバー

CPSU-MANESS-S13S2G21

4 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 19

今までの合計 2,389