はじめに

The optical drive reads the CD/DVD when inserted into the laptop. It is not unusual for the optical drive to go stop working or malfunction as there are numerous moving parts. This device is designed to be easily replaced in the case it does malfunction.

パーツ

パーツは必要ありません。

Make sure the battery lock switch is switched to the unlocked position. The battery is unlocked when the battery lock switch is slid to the side with an image of an unlocked lock. The battery is unlocked when the battery lock switch is slid to the side with an image of an unlocked lock.
  • Make sure the battery lock switch is switched to the unlocked position.

    • The battery is unlocked when the battery lock switch is slid to the side with an image of an unlocked lock.

コメントを追加する

Slide the battery release switch to the left. The switch is spring loaded, so you must hold the switch in place while removing the battery.
  • Slide the battery release switch to the left.

  • The switch is spring loaded, so you must hold the switch in place while removing the battery.

コメントを追加する

Using a finger, lift up the battery. The battery release switch must be held in place.
  • Using a finger, lift up the battery.

  • The battery release switch must be held in place.

コメントを追加する

Remove the two screws holding the hard drive panel down. These screw are permanently fastened to the panel; they are designed to be removed only partially. These screw are permanently fastened to the panel; they are designed to be removed only partially.
  • Remove the two screws holding the hard drive panel down.

  • These screw are permanently fastened to the panel; they are designed to be removed only partially.

コメントを追加する

Use a finger to lift up on the tab and remove the panel.
  • Use a finger to lift up on the tab and remove the panel.

コメントを追加する

Remove the screw that holds in place the optical drive. One 4.6 mm Phillips screw.
  • Remove the screw that holds in place the optical drive.

    • One 4.6 mm Phillips screw.

コメントを追加する

Locate the small rectangular hole and insert the spudger. Gently slide the metal flange to the right to dislodge the optical drive.
  • Locate the small rectangular hole and insert the spudger.

  • Gently slide the metal flange to the right to dislodge the optical drive.

コメントを追加する

The optical drive will become partially exposed.
  • The optical drive will become partially exposed.

コメントを追加する

Pull the optical drive to remove it from the computer body. Pull the optical drive to remove it from the computer body.
  • Pull the optical drive to remove it from the computer body.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Stephen Sippel

メンバー登録日: 2013年04月16日

143 ポイント

9のガイドは作成済み

チーム

Cal Poly, Team 21-54, Johann Spring 2013 Cal Poly, Team 21-54, Johann Spring 2013人のメンバー

CPSU-JOHANN-S13S21G54

4 メンバー

9のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 646