はじめに

The dial up modem allows the user to connect to the internet through a wired connection if a wireless source is not available. This guide shows to the user how to replace the dial up modem if it is not functioning properly.

Make sure the battery lock switch is switched to the unlocked position.
  • Make sure the battery lock switch is switched to the unlocked position.

    • The battery is unlocked when the battery lock switch is slid to the side with an image of an unlocked lock.

コメントを追加する

Slide the battery release switch to the left.
  • Slide the battery release switch to the left.

  • The switch is spring loaded, so you must hold the switch in place while removing the battery.

コメントを追加する

  • Using a finger, lift up the battery.

  • The battery release switch must be held in place.

コメントを追加する

  • Remove the 5 Phillips screws holding the panel in place.

  • These screws are permanently fastened to the panel; they are designed to be removed only partially to avoid loss.

コメントを追加する

  • Use a finger to remove the panel by lifting up on the provided removal tab.

コメントを追加する

  • Remove the two screws holding modem in place.

    • Two 3.6 mm Phillips screws.

コメントを追加する

  • Using a plastic removal tool, dislodge the modem. This separates a small connections on the underside of the modem.

コメントを追加する

  • Grab the black insert connected to the modem. Gently pull the insert outwards to disconnect the cable.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Stephen Sippel

メンバー登録日: 2013年04月16日

167 ポイント

9のガイドは作成済み

チーム

Cal Poly, Team 21-54, Johann Spring 2013 Cal Poly, Team 21-54, Johann Spring 2013人のメンバー

CPSU-JOHANN-S13S21G54

4 メンバー

9のガイドは作成済み

コメント1件

Does someone know anything about the modem connector connecting the modem to the motherboard? Any information like part number, name, manufacturer would be handy.

Kamil - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 5

今までの合計 541