はじめに

The bottom access panel is designed to be quickly and easily removed to allow the consumer quick access to components of the the computer including RAM, the wireless card, and the dial up modem. This panel requires only the the removal of a five screws to gain the user access.

パーツ

パーツは必要ありません。

Make sure the battery lock switch is switched to the unlocked position.
  • Make sure the battery lock switch is switched to the unlocked position.

    • The battery is unlocked when the battery lock switch is slid to the side with an image of an unlocked lock.

コメントを追加する

Slide the battery release switch to the left.
  • Slide the battery release switch to the left.

  • The switch is spring loaded, so you must hold the switch in place while removing the battery.

コメントを追加する

  • Using a finger, lift up the battery.

  • The battery release switch must be held in place.

コメントを追加する

  • Remove the 5 Phillips screws holding the panel in place.

  • These screws are permanently fastened to the panel; they are designed to be removed only partially to avoid loss.

コメントを追加する

  • Use a finger to remove the panel by lifting up on the provided removal tab.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Stephen Sippel

メンバー登録日: 2013年04月16日

167 ポイント

9のガイドは作成済み

チーム

Cal Poly, Team 21-54, Johann Spring 2013 Cal Poly, Team 21-54, Johann Spring 2013人のメンバー

CPSU-JOHANN-S13S21G54

4 メンバー

9のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 9

今までの合計 587