メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

Use this guide to replace or upgrade RAM cards in your Toshiba Satellite L305-S5946. Replacing your RAM cards will allow you to work with more programs. Doing this requires only removal of the battery as a precursor.

  1. Turn the laptop upside-down.
    • Turn the laptop upside-down.

    • Position the laptop so that the display hinges are facing away from you.

  2. Slide the left battery bay latch to the left.
    • Slide the left battery bay latch to the left.

  3. Slide the right battery bay latch to the right and hold. While holding onto the latch, use a plastic opening tool to lift and remove the battery bay cover. Remove the battery.
    • Slide the right battery bay latch to the right and hold.

    • While holding onto the latch, use a plastic opening tool to lift and remove the battery bay cover.

    • Remove the battery.

  4. Essential Electronics Toolkit

    Small Toolkit. Big Possibilities.

    Shop Toolkits

    Essential
    Electronics
    Toolkit

    Shop Toolkits
  5. Use a Phillips #1 screwdriver to turn the screw on the RAM cover.
    • Use a Phillips #1 screwdriver to turn the screw on the RAM cover.

    • Turn the screw until you hear a click.

    • This is a captive panel screw and remains with the cover.

  6. Insert the plastic opening tool into the indent and lift to remove the RAM cover. This is a captive panel screw and remains with the cover.
    • Insert the plastic opening tool into the indent and lift to remove the RAM cover.

    • This is a captive panel screw and remains with the cover.

  7. Use your fingernails to push the white and silver retaining clips away from each side of the RAM card. The RAM card should pop up at an angle.
    • Use your fingernails to push the white and silver retaining clips away from each side of the RAM card.

    • The RAM card should pop up at an angle.

  8. Use your fingers to gently pull the RAM card away from the computer. Repeat step 9 to remove the other RAM card that may be installed.
    • Use your fingers to gently pull the RAM card away from the computer.

    • Repeat step 9 to remove the other RAM card that may be installed.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Michael Erberich

メンバー登録日: 2013年04月17日

112 ポイント

9のガイドは作成済み

チーム

Cal Poly, Team 3-49, Amido Spring 2013 Cal Poly, Team 3-49, Amido Spring 2013人のメンバー

CPSU-AMIDO-S13S3G49

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 7

今までの合計 505