はじめに

Use this guide when your keyboard does not work or if any keys falls off. You cannot replace individual keys.

Slide both of the latches to the outside to release the battery.
  • Slide both of the latches to the outside to release the battery.

コメントを追加する

Pull the battery out by lifting the battery cover away from the laptop.
  • Pull the battery out by lifting the battery cover away from the laptop.

コメントを追加する

  • Flip the computer over and insert the plastic opening tool under the plastic strip at the top of the keyboard.

  • Pry the top plastic strip from the top of the keyboard.

  • Peel the strip completely away from the keyboard.

コメントを追加する

  • Using your Phillips #00, unscrew the two 4.80mm screws at the top of the keyboard.

コメントを追加する

  • When removing the keyboard, be careful not to rip the ribbon cable connecting the keyboard to the computer, to avoid damaging it.

  • Flip the keyboard up from the bottom in order to see the two ribbons connecting it to the motherboard.

コメントを追加する

  • Using the plastic opening tools, pop out the ribbon cable from the rest of the computer.

コメントを追加する

  • Using the plastic opening tools, pop out the second ribbon cable from the rest of the computer.

コメントを追加する

  • Completely remove the keyboard from the laptop by lifting up the part closest to the screen, and then gently pulling out the bottom half.

  • Keep the keyboard safe by storing it on a flat, non-metallic surface until needed.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Ian Washburne

メンバー登録日: 2013年01月11日

45 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 17-21, Forte Winter 2013 Cal Poly, Team 17-21, Forte Winter 2013人のメンバー

CPSU-FORTE-W13S17G21

5 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 7

今までの合計 1,168