修理を始めるには コミュニティ ストア

Toshiba Satellite C55Dt-A5306 Keyboard Replacement

作成者： zeena qiryaqoz (そして 3 人のその他投稿者)
  • コメント: 1
  • お気に入り: 0

難易度

簡単

手順

9

所要時間

10分

セクション

2

フラグ

1

Needs Better Images

高画質の画像が必要

よりよい画像があればこのガイドが改善されます。よければ新しい写真を撮影し、編集し、アップロードしてお手伝いください。

はじめに

This guide will show you how to replace the keyboard on your Toshiba Satellite C55Dt-A5306.

ツール

パーツ

パーツは指定されていません。

  1. Place fingers on the latches and slide outwards to unlock.

    • Place fingers on the latches and slide outwards to unlock.

    編集

  2. Remove battery.

    • Remove battery.

    編集

  3. After removing the battery, open up your device so that the keyboard is facing you. After removing the battery, open up your device so that the keyboard is facing you.

    • After removing the battery, open up your device so that the keyboard is facing you.

    編集

  5. Using the spudger, go around the periphery of the keyboard while gently lifting out the keyboard little by little. Using the spudger, go around the periphery of the keyboard while gently lifting out the keyboard little by little.

    • Using the spudger, go around the periphery of the keyboard while gently lifting out the keyboard little by little.

    編集

  6. Lift the old keyboard out of the way.

    • Lift the old keyboard out of the way.

    編集

  7. Before pulling out the keyboard, notice that it is connected to the motherboard via a ribbon cable. Gently press out the ribbon cable from its connection site and put the old keyboard aside. Before pulling out the keyboard, notice that it is connected to the motherboard via a ribbon cable. Gently press out the ribbon cable from its connection site and put the old keyboard aside.

    • Before pulling out the keyboard, notice that it is connected to the motherboard via a ribbon cable. Gently press out the ribbon cable from its connection site and put the old keyboard aside.

    編集

  8. Locate the keyboard ribbon cable, and the cable retainer keeping it attached to the motherboard.

    • Locate the keyboard ribbon cable, and the cable retainer keeping it attached to the motherboard.

    編集

  9. Use your nylon spudger to release the retainer by gently lifting the retaining clips on either side.

    • Use your nylon spudger to release the retainer by gently lifting the retaining clips on either side.

    編集

  10. Once both retaining clips have been lifted up, the ribbon cable should release with a gentle pull. You can now remove the keyboard.

    • Once both retaining clips have been lifted up, the ribbon cable should release with a gentle pull.

    • You can now remove the keyboard.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3他の投稿者と一緒に

zeena qiryaqoz

メンバー登録日: 2017年01月17日

301 ポイント

3のガイドは作成済み

バッジ: 6

+3 個以上のバッジ

チーム

Oakland University, Team 2-3, Ruskiewicz Winter 2017 Oakland University, Team 2-3, Ruskiewicz Winter 2017人のメンバー

OAK-RUSKIEWICZ-W17S2G3

4 メンバー

7のガイドは作成済み

コメント1件

mein keyboard war leider noch mit 2 schraubenähnlichen Arretierungen befestigt, und die Laschen an den Seiten ließen sich nur mit Gewalt aufbiegen, so daß das alte Keyboard jetzt im Unterblech ziemlich verbogen ist. C55Dt-A5306

immerich - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 576