メインコンテンツにスキップ

はじめに

If the hard drive in your laptop begins to make a loud clicking noise known as "the Click of Death", use this guide to remove and replace your hard drive.

パーツ

パーツは指定されていません。

  1. Turn off your laptop before starting. Flip the laptop over so the model stickers face the ceiling.
    • Turn off your laptop before starting.

    • Flip the laptop over so the model stickers face the ceiling.

  2. Use a Phillips #1 screwdriver (PH1 bit) to remove the two 7 mm screws that secure the battery. Use a Phillips #1 screwdriver (PH1 bit) to remove the two 7 mm screws that secure the battery. Use a Phillips #1 screwdriver (PH1 bit) to remove the two 7 mm screws that secure the battery.
    • Use a Phillips #1 screwdriver (PH1 bit) to remove the two 7 mm screws that secure the battery.

  3. Carefully slide the battery out of the laptop. Carefully slide the battery out of the laptop.
    • Carefully slide the battery out of the laptop.

  4. Use a Phillips #1 screwdriver (PH1 bit) to remove the single 7 mm screw that secures the CD/DVD drive.
    • Use a Phillips #1 screwdriver (PH1 bit) to remove the single 7 mm screw that secures the CD/DVD drive.

  5. Slide the CD/DVD Drive out of the laptop. Slide the CD/DVD Drive out of the laptop.
    • Slide the CD/DVD Drive out of the laptop.

  6. Use a Phillips #1 screwdriver (PH1 bit) to remove the thirteen 7 mm screws that secure the bottom cover.
    • Use a Phillips #1 screwdriver (PH1 bit) to remove the thirteen 7 mm screws that secure the bottom cover.

  7. Use a plastic opening tool to separate the back cover from the laptop. It is recommended that you start from a corner, and run the tool along the edge of the cover.
    • Use a plastic opening tool to separate the back cover from the laptop.

    • It is recommended that you start from a corner, and run the tool along the edge of the cover.

    • Be careful not to bend or crack the plastic back cover.

  8. Using the ribbon beneath the hard drive lift it upwards and pull the hard drive out. Using the ribbon beneath the hard drive lift it upwards and pull the hard drive out.
    • Using the ribbon beneath the hard drive lift it upwards and pull the hard drive out.

  9. Remove the hard drive from the blue rubber mount. Remove the hard drive from the blue rubber mount. Remove the hard drive from the blue rubber mount.
    • Remove the hard drive from the blue rubber mount.

終わりに

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

Crystal Loomis

メンバー登録日: 2018年01月22日

702 ポイント

5のガイドは作成済み

チーム

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 2

過去 7 日: 5

過去 30 日: 39

今までの合計 2,202