メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

The hard drive of a laptop is where all the data is stored. From your operating system to those pictures of your dogs, it's all located within this unassuming gizmo. If a hard drive fails, it can be catastrophic. Be sure to back up important data regularly!

  1. Unplug and power off the laptop.
    • Unplug and power off the laptop.

    • Unscrew the two 9 mm Phillips #1screws holding the battery in place.

  2. Grab the battery and pull it away from the laptop to remove it. This doesn't require a lot of effort, so you don't have to pull too hard.
    • Grab the battery and pull it away from the laptop to remove it.

    • This doesn't require a lot of effort, so you don't have to pull too hard.

  3. Unscrew the 10 9.0 mm screws holding the back panel on using a Phillips head #1 screwdriver.
    • Unscrew the 10 9.0 mm screws holding the back panel on using a Phillips head #1 screwdriver.

  4. 今あるものを使い続けましょう

    オールインワインキットで安く修理して、節約しましょう。

    iPhone 修理キットを見る

    今あるものを使い続けましょう

    オールインワインキットで安く修理して、節約しましょう。

    iPhone 修理キットを見る
  5. Using a metal spudger can damage sensitive components. Insert a metal spudger tool in the seam between the back cover and the laptop itself. Gently run the spudger around the edge to pop the cover off.
    • Using a metal spudger can damage sensitive components.

    • Insert a metal spudger tool in the seam between the back cover and the laptop itself. Gently run the spudger around the edge to pop the cover off.

  6. Pry up the  back panel from the rest of the laptop using  a spudger. It is best to start around the USB port and work your way around the edge until the panel completely snaps off.
    • Pry up the back panel from the rest of the laptop using a spudger.

    • It is best to start around the USB port and work your way around the edge until the panel completely snaps off.

  7. Pull the two rubber stops upward to move them out of the way and free the hard drive.
    • Pull the two rubber stops upward to move them out of the way and free the hard drive.

  8. Slide the hard drive to the right towards the stops. This disconnects it from the motherboard.
    • Slide the hard drive to the right towards the stops. This disconnects it from the motherboard.

    • This will require some force to slide the hard drive.

  9. The hard drive can be lifted out for replacement.
    • The hard drive can be lifted out for replacement.

終わりに

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

Greg Smith

メンバー登録日: 2016年10月24日

311 ポイント

2のガイドは作成済み

チーム

UMass Dartmouth, Team 4-1, Catania Fall 2016 UMass Dartmouth, Team 4-1, Catania Fall 2016人のメンバー

UMASSD-CATANIA-F16S4G1

2 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 5

過去 7 日: 35

過去 30 日: 131

今までの合計 10,438