メインコンテンツにスキップ

はじめに

If your battery is not working and you need to take it out, do the following steps to remove it properly.

  1. Make sure you turn off the laptop before starting. Remove the two 6.5mm PH1 Phillips screws securing the battery. Remove the two 6.5mm PH1 Phillips screws securing the battery.
    • Make sure you turn off the laptop before starting.

    • Remove the two 6.5mm PH1 Phillips screws securing the battery.

  2. Pull the battery out, keeping it flat and parallel to the laptop so that it slides out easily. Pull the battery out, keeping it flat and parallel to the laptop so that it slides out easily. Pull the battery out, keeping it flat and parallel to the laptop so that it slides out easily.
    • Pull the battery out, keeping it flat and parallel to the laptop so that it slides out easily.

終わりに

To reassemble your device, follow these instructions in reverse order.

Abdel Feliciano Gonzalez

メンバー登録日: 2017年02月28日

695 ポイント

4のガイドは作成済み

チーム

USF Tampa, Team S1-G5, Nance Spring 2017 USF Tampa, Team S1-G5, Nance Spring 2017人のメンバー

USFT-NANCE-S17S1G5

3 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 2

過去 7 日: 7

過去 30 日: 32

今までの合計 1,250