Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens. It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel's sides and then front edge. It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel's sides and then front edge.
  • Use the plastic opening tool to lift up the top panel all the way along the keyboard until it loosens.

  • It may be helpful to first pry at the rear of the hinge covers (not shown) to release them. Then Insert the plastic opening tool underneath the top panel's sides and then front edge.

コメントを追加する

Remove the top panel by popping the panel out the top left socket, then do the same with the right side. Remove the top panel by popping the panel out the top left socket, then do the same with the right side.
  • Remove the top panel by popping the panel out the top left socket, then do the same with the right side.

コメントを追加する

Remove the two 3.67 mm screws from the top corners of the keyboard. Remove the two 3.67 mm screws from the top corners of the keyboard. Remove the two 3.67 mm screws from the top corners of the keyboard.
  • Remove the two 3.67 mm screws from the top corners of the keyboard.

コメントを追加する

Use fingers to lift up the keyboard from the top.
  • Use fingers to lift up the keyboard from the top.

  • Do not try to remove the keyboard completely because it is still attached to the motherboard.

コメントを追加する

Remove the cable connecting the keyboard with the motherboard. Be aware of the locking tabs on each side of the ribbon-cable connector—they slide back about 2mm to free the cable. Lift up and remove the keyboard.
  • Remove the cable connecting the keyboard with the motherboard.

  • Be aware of the locking tabs on each side of the ribbon-cable connector—they slide back about 2mm to free the cable.

  • Lift up and remove the keyboard.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Garrett Gudgel

メンバー登録日: 2010年10月05日

714 ポイント

13のガイドは作成済み

チーム

Cal Poly, Team 4-43, Amido Fall 2010 Cal Poly, Team 4-43, Amido Fall 2010人のメンバー

CPSU-AMIDO-F10S4G43

5 メンバー

13のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 4

今までの合計 3,959