はじめに

The purpose of this guide is to provide step-by-step instructions for replacing your hard drive. For this process you will need a Phillips #00 screwdriver.

パーツ

パーツは必要ありません。

  1. Locate the hard drive cover on the bottom, left-hand corner of your laptop.
    • Locate the hard drive cover on the bottom, left-hand corner of your laptop.

    • Using a Phillips #00 screwdriver, remove both 4mm screws.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  3. Lift the cover to reveal the old hard drive.
    • Lift the cover to reveal the old hard drive.

    • Carefully detach the hard drive from the SATA/Power connector.

  4. After removing the old hard drive, place the new hard drive into the bay, and  firmly reattach it to the SATA/Power connector.
    • After removing the old hard drive, place the new hard drive into the bay, and firmly reattach it to the SATA/Power connector.

まとめ

To reassemble your device, follow these instructions in reverse order.

Daniel Johnson

メンバー登録日: 2013年04月07日

102 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 17-6, Regan Spring 2013 Cal Poly, Team 17-6, Regan Spring 2013人のメンバー

CPSU-REGAN-S13S17G6

5 メンバー

11のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 9

今までの合計 1,555