はじめに

Oftentimes, things get stuck in between keys, or keys labels get worn out with use. This guide will assist in replacing that broken keyboard with a new one.

Stick a spudger in one of the sides of the top panel. Lift slowly from one side to the other and it will pop off.
  • Stick a spudger in one of the sides of the top panel. Lift slowly from one side to the other and it will pop off.

コメントを追加する

Using an Phillips screwdriver, unscrew and remove two screws labeled B2.6.
  • Using an Phillips screwdriver, unscrew and remove two screws labeled B2.6.

コメントを追加する

  • Using your hands, lift keyboard up toward you, starting from the edge closest to the screen.

  • The keyboard is still connected to the laptop by a ribbon. Place the keyboard gently on top of the trackpad, keys side down.

コメントを追加する

  • Find the white ribbon connector (where the keyboard is still attached to the rest of the laptop).

  • Slide the white ribbon connector up and lift the ribbon out of it.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Hannah

メンバー登録日: 2010年06月24日

209 ポイント

7のガイドは作成済み

チーム

Cal Poly, Team 3-5, Johann Summer 2010 Cal Poly, Team 3-5, Johann Summer 2010人のメンバー

CPSU-JOHANN-R10S3G5

4 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 2,457