はじめに

A working power button makes the difference between a working laptop and a brick. If your laptop refuses to turn on or doesn't respond to power button presses; replacing the power button circuit board may fix it.

The battery is located on the front right corner of the laptop.
  • The battery is located on the front right corner of the laptop.

コメントを追加する

With one finger on the raised grip, slide the latch towards the front of the laptop.
  • With one finger on the raised grip, slide the latch towards the front of the laptop.

コメントを追加する

Pull the battery out towards the side. Pull the battery out towards the side.
  • Pull the battery out towards the side.

コメントを追加する

Lift the battery straight up, out of the computer. Lift the battery straight up, out of the computer.
  • Lift the battery straight up, out of the computer.

コメントを追加する

Using a set of case opening tools, pry open the left and right sides of the black plastic strip above the keyboard. Fully detach the strip. Fully detach the strip.
  • Using a set of case opening tools, pry open the left and right sides of the black plastic strip above the keyboard.

  • Fully detach the strip.

These last two pictures seem to show the same thing.

Dan Brown - 返信

Unscrew the two screws near the top of the keyboard. Unscrew the two screws near the top of the keyboard.
  • Unscrew the two screws near the top of the keyboard.

Make sure to include screw lengths to the nearest mm.

Dan Brown - 返信

Lift the keyboard by holding the middle top of the keyboard. The keyboard is still connected by a ribbon cable to the motherboard.
  • Lift the keyboard by holding the middle top of the keyboard.

  • The keyboard is still connected by a ribbon cable to the motherboard.

コメントを追加する

Carefully pull upwards on the ribbon cable to detach. Remove keyboard. Remove keyboard.
  • Carefully pull upwards on the ribbon cable to detach.

  • Remove keyboard.

コメントを追加する

Unscrew the screws on either side of the power button circuit board. Unscrew the screws on either side of the power button circuit board.
  • Unscrew the screws on either side of the power button circuit board.

コメントを追加する

Pull upward on the small white ribbon cable to detach from circuit board. Pull upward on the small white ribbon cable to detach from circuit board.
  • Pull upward on the small white ribbon cable to detach from circuit board.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Kiril Lange

メンバー登録日: 2014年09月22日

901 ポイント

9のガイドは作成済み

チーム

USF Tampa, Team 3-2, Brown Fall 2014 USF Tampa, Team 3-2, Brown Fall 2014人のメンバー

USFT-BROWN-F14S3G2

3 メンバー

9のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 13

今までの合計 531