メインコンテンツにスキップ

Toshiba SD-K740 Inverter Board Replacement

必要な工具と部品

  1. Toshiba SD-K740 Inverter Board Replacement, Top Panel: 手順 1、 1の画像 1
    • Unplug the DVD player before beginning.

    • Remove the three 7.7 mm screws from the back panel using a Phillips #0 screwdriver.

  2. Toshiba SD-K740 Inverter Board Replacement: 手順 2、 2の画像 1 Toshiba SD-K740 Inverter Board Replacement: 手順 2、 2の画像 2
    • Turn the DVD player on its side.

    • Remove the 7.7 mm screw.

    • Flip the DVD player onto its other side.

    • Remove the 7.7 mm screw.

  3. Toshiba SD-K740 Inverter Board Replacement: 手順 3、 1の画像 1
    • Flip the DVD player over onto its front face.

    • Remove the back panel by lifting up and pulling it towards yourself.

  4. Toshiba SD-K740 Inverter Board Replacement, Front Panel: 手順 4、 1の画像 1
    • Flip the DVD player so its top is sitting on your working surface.

    • Lift and push away the two tabs located in the middle of the player.

    • The front panel will not detach during this step, so do not force it.

  5. Toshiba SD-K740 Inverter Board Replacement: 手順 5、 1の画像 1
    • Flip the DVD player on its side.

    • Lift and slide forward the single tab on the side.

    • The front panel will not detach during this step, so do not force it.

  6. Toshiba SD-K740 Inverter Board Replacement: 手順 6、 2の画像 1 Toshiba SD-K740 Inverter Board Replacement: 手順 6、 2の画像 2
    • Grasp the front panel and pull forward to your right to remove it.

  7. Toshiba SD-K740 Inverter Board Replacement, Inverter Board: 手順 7、 1の画像 1
    • Remove the black tie holding the two rear ribbon cables together by untwisting it.

  8. Toshiba SD-K740 Inverter Board Replacement: 手順 8、 2の画像 1 Toshiba SD-K740 Inverter Board Replacement: 手順 8、 2の画像 2
    • Remove the first of two ribbon cables connected to the motherboard by pulling vertically.

  9. Toshiba SD-K740 Inverter Board Replacement: 手順 9、 2の画像 1 Toshiba SD-K740 Inverter Board Replacement: 手順 9、 2の画像 2
    • Remove the second of two ribbon cables connected to the motherboard by pulling vertically.

  10. Toshiba SD-K740 Inverter Board Replacement: 手順 10、 1の画像 1
    • Pull the two cables to the right to disentangle from the disc drive.

    • Do not tug, pull, or force cable, it should slide out with minimal force.

  11. Toshiba SD-K740 Inverter Board Replacement: 手順 11、 1の画像 1
    • Pull power cord vertically to detach from the casing.

  12. Toshiba SD-K740 Inverter Board Replacement: 手順 12、 1の画像 1
    • Remove the three .303 inch screws attaching the inverter board to the casing using a #0 Phillips screwdriver.

  13. Toshiba SD-K740 Inverter Board Replacement: 手順 13、 1の画像 1
    • Push the inverter board forward and to the left to remove from the holding ledges.

  14. Toshiba SD-K740 Inverter Board Replacement: 手順 14、 2の画像 1 Toshiba SD-K740 Inverter Board Replacement: 手順 14、 2の画像 2
    • Lift the inverter board from the back end and pull toward you to complete removal.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

6人の作成者と共同で作成されました。

Joe Murphy

メンバー登録日: 01/20/11

542 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 1-16, Amido Winter 2011 Cal Poly, Team 1-16, Amido Winter 2011人のメンバー

CPSU-AMIDO-W11S1G16

4 メンバー

8のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 2,096