はじめに

This guide gives instructions on how to remove the disc drive front flap of the Toshiba SD-K740 DVD player.

パーツ

パーツは必要ありません。

Make sure the DVD player is unplugged before beginning.
  • Make sure the DVD player is unplugged before beginning.

  • Remove the three .303 inch screws from the back panel using a #0 Phillips head screwdriver.

コメントを追加する

Turn the DVD player on its side. Remove the .303 inch screw.
  • Turn the DVD player on its side.

  • Remove the .303 inch screw.

  • Now flip the DVD player onto its other side.

  • Remove the .303 inch screw from this side.

コメントを追加する

Flip the DVD player over onto it's front face.
  • Flip the DVD player over onto it's front face.

  • Remove the back panel by lifting up and pulling it towards yourself.

コメントを追加する

Flip the DVD player so its top is sitting on your working surface.
  • Flip the DVD player so its top is sitting on your working surface.

  • Lift and push away each of the two tabs located in the middle of the player.

  • The front panel will not come off during this step, so do not force it.

コメントを追加する

Flip the DVD player on its side.
  • Flip the DVD player on its side.

  • Lift and slide forward a single tab on the side.

  • The front panel will not come off during this step, so do not force it.

コメントを追加する

Grasp the front panel and pull forward and to your right to remove. Grasp the front panel and pull forward and to your right to remove.
  • Grasp the front panel and pull forward and to your right to remove.

コメントを追加する

On back side of front panel very carefully apply pressure to the left hand side of the flap hinge. There is just enough tolerance in the plastic to allow removal, be careful of brittle plastic.
  • On back side of front panel very carefully apply pressure to the left hand side of the flap hinge.

  • There is just enough tolerance in the plastic to allow removal, be careful of brittle plastic.

コメントを追加する

Once the peg is free from the left restraint, carefully remove the left part of the flap.
  • Once the peg is free from the left restraint, carefully remove the left part of the flap.

  • Carefully remove the right peg from the restraint.

  • Do not pull away from the front panel because the spring is still attached.

  • Do not force the plastic.

コメントを追加する

Remove the spring from the end of the right peg by pulling the door away from the spring.
  • Remove the spring from the end of the right peg by pulling the door away from the spring.

  • Do not pull away from the front panel until the spring has been removed from the flap.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

John Lokker

メンバー登録日: 2011年01月20日

319 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 1-16, Amido Winter 2011 Cal Poly, Team 1-16, Amido Winter 2011人のメンバー

CPSU-AMIDO-W11S1G16

4 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 8

今までの合計 1,136