メニュー

Your Settings

私のワークベンチ

お持ちのデバイス用の修理ガイド、交換用パーツやアンサーフォーラムにアクセスする。
カート

カートには何も入っていません。

当社のショップを閲覧する

Toshiba SD-K740 Disc Drive Replacement

作成者： Joe Murphy (そして 5 人のその他投稿者)
  • コメント: 0
  • お気に入り: 1
  • 完了: 1

難易度

簡単

手順

11

所要時間

10分

セクション

3

フラグ

1

Grammar Police

文法の修正

あなたの中にある日本語能力を呼び起こし、このガイドの文法に磨きをかけましょう。

はじめに

This guide gives instructions on how to remove the disc drive of the Toshiba SD-K740 DVD player.

ツール

これらのツールを購入する

パーツ

パーツは必要ありません。

  1. Make sure the DVD player is unplugged before beginning.

    • Make sure the DVD player is unplugged before beginning.

    • Remove the three .303 inch screws from the back panel using a #0 Phillips head screwdriver.

    翻訳

  2. Turn the DVD player on its side. Remove the .303 inch screw.

    • Turn the DVD player on its side.

    • Remove the .303 inch screw.

    • Now flip the DVD player onto its other side.

    • Remove the .303 inch screw from this side.

    翻訳

  3. Flip the DVD player over onto it's front face.

    • Flip the DVD player over onto it's front face.

    • Remove the back panel by lifting up and pulling it towards yourself.

    翻訳

  4. Flip the DVD player so its top is sitting on your working surface.

    • Flip the DVD player so its top is sitting on your working surface.

    • Lift and push away each of the two tabs located in the middle of the player.

    • The front panel will not come off during this step, so do not force it.

    翻訳

  5. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する

  6. Flip the DVD player on its side.

    • Flip the DVD player on its side.

    • Lift and slide forward a single tab on the side.

    • The front panel will not come off during this step, so do not force it.

    翻訳

  7. Grasp the front panel and pull forward and to your right to remove. Grasp the front panel and pull forward and to your right to remove.

    • Grasp the front panel and pull forward and to your right to remove.

    翻訳

  8. Remove the first of three ribbon cables on left hand side of disc drive by pulling vertically. Remove the first of three ribbon cables on left hand side of disc drive by pulling vertically.

    • Remove the first of three ribbon cables on left hand side of disc drive by pulling vertically.

    翻訳

  9. Remove the second of three ribbon cables on left hand side of disc drive by pulling vertically. Remove the second of three ribbon cables on left hand side of disc drive by pulling vertically.

    • Remove the second of three ribbon cables on left hand side of disc drive by pulling vertically.

    翻訳

  10. Remove the third of three ribbon cables on left hand side of disc drive by pulling vertically. Remove the third of three ribbon cables on left hand side of disc drive by pulling vertically.

    • Remove the third of three ribbon cables on left hand side of disc drive by pulling vertically.

    翻訳

  11. Remove the four screws holding the disc drive in place using a #0 Phillips screwdriver.

    • Remove the four screws holding the disc drive in place using a #0 Phillips screwdriver.

    翻訳

  12. Lift disc drive vertically to remove.

    • Lift disc drive vertically to remove.

    翻訳
まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

5他の投稿者と一緒に

Joe Murphy

メンバー登録日: 2011年01月20日

542 ポイント

5のガイドは作成済み

バッジ: 10

+7 個以上のバッジ

チーム

Cal Poly, Team 1-16, Amido Winter 2011 Cal Poly, Team 1-16, Amido Winter 2011人のメンバー

CPSU-AMIDO-W11S1G16

4 メンバー

8のガイドは作成済み

0コメント

コメントを追加
統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 12

今までの合計 2,200