メインコンテンツにスキップ
  1. Remove the thirteen 1.4mm screws using a Phillips #2 screwdriver.
    • Remove the thirteen 1.4mm screws using a Phillips #2 screwdriver.

  2. Locate hidden screw found in the middle of back hardcover.
    • Locate hidden screw found in the middle of back hardcover.

    • Here you will find a proprietary Japanese Screw Head.

    • Remove screw by using tool not provided by IFixit or by using the methods found here.

  3. Peel off hard cover to expose interior of device
    • Peel off hard cover to expose interior of device

  4. Remove the two 1 mm screws using a Phillips #2 screwdriver.
    • Remove the two 1 mm screws using a Phillips #2 screwdriver.

  5. Unplug the internal cooling fan by tugging gently on the wire attatched to the device's motherboard
    • Unplug the internal cooling fan by tugging gently on the wire attatched to the device's motherboard

  6. Lift the internal cooling fan to remove the fan from the device
    • Lift the internal cooling fan to remove the fan from the device

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Dominic Whiting

メンバー登録日: 2018年02月08日

879 ポイント

5のガイドは作成済み

チーム

University of North Texas, Team S2-G3, Thomas Spring 2018 University of North Texas, Team S2-G3, Thomas Spring 2018人のメンバー

UNT-THOMAS-S18S2G3

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 348