メインコンテンツにスキップ

パーツ

パーツは指定されていません。

  1. Using the spudger, gently pry the desired key up on one side. This will release the key.
    • Using the spudger, gently pry the desired key up on one side. This will release the key.

    • The key is held in place by very small plastic pieces. Improper removal or installation may damage key permanently and require entire keyboard replacement.

  2. Use a brush to remove debris and use a cleaner cloth to remove residue. Similarly, remove debris and residue from the area of the keyboard where the key was originally seated.
    • Use a brush to remove debris and use a cleaner cloth to remove residue.

    • Similarly, remove debris and residue from the area of the keyboard where the key was originally seated.

  3. Once clean, set the key above its original position and firmly press it back into place.
    • Once clean, set the key above its original position and firmly press it back into place.

    • If cleaned and installed properly the key should depress smoothly and spring back to normal position once released.

まとめ

This is a complete guide to removing a key and cleaning the area before replacement.

Mason McCaskill

メンバー登録日: 2013年10月18日

964 ポイント

9のガイドは作成済み

チーム

Clemson, Team 14-2, Benson Fall 2013 Clemson, Team 14-2, Benson Fall 2013人のメンバー

CLEM-BENSON-F13S14G2

3 メンバー

9のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 327