1. To expose the hard drive, use a bit driver and a Star #0 bit to remove the two designated screws. Gently lift the panel off.
    • To expose the hard drive, use a bit driver and a Star #0 bit to remove the two designated screws.

    • Gently lift the panel off.

  2. With the panel removed, slide the hard drive towards the top of the netbook with moderate force. This will free the hard drive from its original location.
    • With the panel removed, slide the hard drive towards the top of the netbook with moderate force.

    • This will free the hard drive from its original location.

  3. Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

    当社のショップを閲覧する
  4. Obtain a new hard drive. Apply firm pressure to secure the new hard drive into the old hard drive's location.
    • Obtain a new hard drive.

    • Apply firm pressure to secure the new hard drive into the old hard drive's location.

  5. Place the back panel in its original position. Using the bit driver and Phillips #0 bit, secure the hard drive panel to the netbook body.
    • Place the back panel in its original position.

    • Using the bit driver and Phillips #0 bit, secure the hard drive panel to the netbook body.

ゴール

ある他の人がこのガイドを完成しました。

Mason McCaskill

メンバー登録日: 2013年10月18日

943 ポイント

9のガイドは作成済み

チーム

Clemson, Team 14-2, Benson Fall 2013 Clemson, Team 14-2, Benson Fall 2013人のメンバー

CLEM-BENSON-F13S14G2

3 メンバー

9のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 4

過去 30 日: 15

今までの合計 1,791