メインコンテンツにスキップ

はじめに

Over time, speaker quality can degrade for a variety of reasons. Replacing the speakers will fix most issues involving sound and sound quality.

パーツ

パーツは指定されていません。

  1. Remove all external devices from the Toshiba Chromebook 2.
    • Remove all external devices from the Toshiba Chromebook 2.

  2. Close the Toshiba Chromebook 2 and turn it over so that the bottom of the laptop is facing upwards toward you with the lettering on the bottom facing right side up.
    • Close the Toshiba Chromebook 2 and turn it over so that the bottom of the laptop is facing upwards toward you with the lettering on the bottom facing right side up.

  3. Remove the 8 visible Phillips 8.25 mm screws using the Phillips #0 screwdriver. Remove the 8 visible Phillips 8.25 mm screws using the Phillips #0 screwdriver.
    • Remove the 8 visible Phillips 8.25 mm screws using the Phillips #0 screwdriver.

  4. Remove 2 hidden Phillips 8.25 mm screws located underneath the rubber grips at the back (opposite the hinges) with the  Phillips #0 screwdriver. The rubber grips are glued in place, so you'll need to peel them up with a spudger or other pry tool.
    • Remove 2 hidden Phillips 8.25 mm screws located underneath the rubber grips at the back (opposite the hinges) with the Phillips #0 screwdriver.

    • The rubber grips are glued in place, so you'll need to peel them up with a spudger or other pry tool.

  5. Remove the back panel by pulling up on 2 adjacent corners.
    • Remove the back panel by pulling up on 2 adjacent corners.

  6. Remove the 4 Phillips 2 mm screws holding the battery in place with the Phillips #0 screwdriver. Remove the 4 Phillips 2 mm screws holding the battery in place with the Phillips #0 screwdriver.
    • Remove the 4 Phillips 2 mm screws holding the battery in place with the Phillips #0 screwdriver.

  7. Press down on the white clip and softly pull the wires out of the port to disconnect battery from the motherboard. Press down on the white clip and softly pull the wires out of the port to disconnect battery from the motherboard.
    • Press down on the white clip and softly pull the wires out of the port to disconnect battery from the motherboard.

  8. Remove the battery by gently pulling up on the bottom corners.
    • Remove the battery by gently pulling up on the bottom corners.

  9. Remove the 2 3.3 mm screws holding the left and right speakers with the Phillips #0 screwdriver.
    • Remove the 2 3.3 mm screws holding the left and right speakers with the Phillips #0 screwdriver.

  10. Pull the red and white wires out of the socket above the left speaker to disconnect the speakers from the motherboard. Pull the red and white wires out of the socket above the left speaker to disconnect the speakers from the motherboard. Pull the red and white wires out of the socket above the left speaker to disconnect the speakers from the motherboard.
    • Pull the red and white wires out of the socket above the left speaker to disconnect the speakers from the motherboard.

  11. Remove the speakers by lifting upwards.
    • Remove the speakers by lifting upwards.

    • Wiring connecting the left and right speakers may be taped to the top of the battery. Simply remove the tape to remove the speakers.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Alec Marnoch

メンバー登録日: 2016年10月06日

233 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 10-4, Livingston Fall 2016 Cal Poly, Team 10-4, Livingston Fall 2016人のメンバー

CPSU-LIVINGSTON-F16S10G4

4 メンバー

11のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 611