Engage Wired Optical Mouse Top and Outer Shell Removal

はじめに

The first step of disassembling the Engage Wired Optical Mouse is to remove the outer shell and main top component of the mouse without damaging any parts.

Note that the circuit board has capacitors. Though they aren't very dangerous, you may wish to discharge them before handling the circuit board. A tool to accomplish this can be found here.

必要な工具と部品

手順1 Engage Wired Optical Mouse Top and Outer Shell Removal

Engage Wired Optical Mouse Top and Outer Shell Removal, Engage Wired Optical Mouse Top and Outer Shell Removal: 手順 1、 1の画像 1

Flip the mouse over and peel off the stickers on the perimeter of the bottom of the mouse.

翻訳

my mouse sucks i peeled off the tape and there is a layer of something blocking the the screw it is a gaming mouse and i got it 2 weeks ago

Nathan Swercewski - 2018年2月1日返信

My mouse does not have any screws on it what do I do

Blakemoller - 2020年5月20日返信

Use a spudger

Toon Konings - 2022年5月4日

手順2

Use the Phillips #1 screwdriver to remove four 5 mm screws from the bottom of the mouse.
Use the Phillips #1 screwdriver to remove the two 9 mm screws from the bottom of the mouse.

翻訳

手順3

Engage Wired Optical Mouse Top and Outer Shell Removal: 手順 3、 3の画像 3

Grab the top shell of the mouse and lift up to remove.

翻訳

手順4

The capacitors on this board can release stored electrical energy if touched.
Touch your capacitor discharge tool to the capacitor leads on the board to release the stored energy. If leads are inaccessible, wait until you've removed the board from the mouse body.

翻訳