メインコンテンツにスキップ

TomTom XXL 540 Screen Replacement

必要な工具と部品

  1. TomTom XXL 540  Screen Replacement, Screen: 手順 1、 1の画像 1
    • Peel back the sticker, using the tweezers on the bottom of the device to reveal the two screws.

  2. TomTom XXL 540  Screen Replacement: 手順 2、 1の画像 1
    • Unscrew the two T5 screws using the T5 Torx Screwdriver.

  3. TomTom XXL 540  Screen Replacement: 手順 3、 1の画像 1
    • Insert the flat head screwdriver into the edge of the device. Using it as a lever, carefully pry the face-plate up.

  4. TomTom XXL 540  Screen Replacement: 手順 4、 1の画像 1
    • Carefully grab the ribbon cable with two fingers and pull the yellow ribbon cable upwards away from the motherboard.

  5. TomTom XXL 540  Screen Replacement: 手順 5、 1の画像 1
    • Remove the screen from of the face-plate.

  6. TomTom XXL 540  Screen Replacement: 手順 6、 1の画像 1
    • Insert the new screen into the face-plate.

  7. TomTom XXL 540  Screen Replacement: 手順 7、 1の画像 1
    • Reattach the yellow ribbon cable to the motherboard.

  8. TomTom XXL 540  Screen Replacement: 手順 8、 1の画像 1
    • Using two hands, hold both ends of the device and snap the two plates together.

  9. TomTom XXL 540  Screen Replacement: 手順 9、 1の画像 1
    • Re-insert the two T5 screws and tighten.

  10. TomTom XXL 540  Screen Replacement: 手順 10、 1の画像 1
    • Re-apply the label edges back down to cover the screws.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

7人の作成者と共同で作成されました。

Mike Sollars

メンバー登録日: 07/11/13

519 ポイント

3のガイドは作成済み

チーム

WRI115, Team 1-1, Ruszkiewicz Spring 2013 WRI115, Team 1-1, Ruszkiewicz Spring 2013人のメンバー

WRI115-RUSZKIEWICZ-S13S1G1

4 メンバー

6のガイドは作成済み

コメント 1 件

Hi! Thanks for doing this. How do I release the yellow cable from the board?

Shaun B - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 9

今までの合計 1,879