メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

This guide will teach you how to properly disassemble a Toastmaster toaster over and replace the toasting knob. Before you begin, clean out your toaster oven and make sure it is off and unplugged.

パーツ

パーツは指定されていません。

  1. Remove the two 4mm by 8mm screws from the back of the toaster oven. Remove the two 4mm by 8mm screws from the back of the toaster oven. Remove the two 4mm by 8mm screws from the back of the toaster oven.
    • Remove the two 4mm by 8mm screws from the back of the toaster oven.

  2. Remove the four 4mm by 8mm screws from the black supports from the base of the toaster oven. Take the  two supports off of the bottom. Take the  two supports off of the bottom.
    • Remove the four 4mm by 8mm screws from the black supports from the base of the toaster oven.

    • Take the two supports off of the bottom.

  3. Remove the two 4mm by 4mm screws from the base in order to remove the tray. Remove the two 4mm by 4mm screws from the base in order to remove the tray.
    • Remove the two 4mm by 4mm screws from the base in order to remove the tray.

  4. Slide the back panel off of the oven.
    • Slide the back panel off of the oven.

  5. Grip the sides of the metal cover and lift the cover up off the toaster oven top.
    • Grip the sides of the metal cover and lift the cover up off the toaster oven top.

  6. The knob is missing in the first picture. Push the knob into the hole. The knob is now back in place in the last picture.
    • The knob is missing in the first picture.

    • Push the knob into the hole.

    • The knob is now back in place in the last picture.

終わりに

To reassemble your device, follow these instructions in reverse order.

Alissa Mell

メンバー登録日: 2017年09月26日

101 ポイント

1ガイドが承認済み

チーム

Michigan Tech, Team S5-G25, Galliah Fall 2017 Michigan Tech, Team S5-G25, Galliah Fall 2017人のメンバー

MTU-GALLIAH-F17S5G25

1 メンバー

1のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 26

今までの合計 833