メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

TiVo Series 2 TCD540080 Motherboard Replacement

必要な工具と部品

  1. TiVo Series 2 TCD540080 Motherboard Replacement, Removal of TiVo Series 2 TCD540080 Case: 手順 1、 1の画像 1
    • Power down the TiVo and detach the power cable from the rear of the unit.

    • Wait 5 minutes for the unit to fully discharge before proceeding to the next step.

  2. TiVo Series 2 TCD540080 Motherboard Replacement: 手順 2、 1の画像 1
    • Remove the five T10 screws from the rear of the case using the Torx screwdriver.

  3. TiVo Series 2 TCD540080 Motherboard Replacement: 手順 3、 2の画像 1 TiVo Series 2 TCD540080 Motherboard Replacement: 手順 3、 2の画像 2
    • Lift up and pull back the outer casing towards the rear of the unit.

  4. TiVo Series 2 TCD540080 Motherboard Replacement, Motherboard: 手順 4、 1の画像 1
    • On the rear of the device, remove the right screw with a T10 Torx Screwdriver.

    • Unscrew the two black screws on the left with a T8 Torx Screwdriver.

  5. TiVo Series 2 TCD540080 Motherboard Replacement: 手順 5、 1の画像 1
    • Disconnect the white ribbon cable from the motherboard.

    • The black base where the cable is connected is not part of the cable. Do not lift up on it!

  6. TiVo Series 2 TCD540080 Motherboard Replacement: 手順 6、 1の画像 1
    • Remove fan power connector.

  7. TiVo Series 2 TCD540080 Motherboard Replacement: 手順 7、 1の画像 1
    • Disconnect the hard drive data cable.

    • Use extreme caution when unplugging the connector and do not disconnect the data cable by pulling on the cable itself.

  8. TiVo Series 2 TCD540080 Motherboard Replacement: 手順 8、 1の画像 1
    • Disconnect the connector cable that goes to the lights on the front of the device.

  9. TiVo Series 2 TCD540080 Motherboard Replacement: 手順 9、 1の画像 1
    • Unscrew the four screws on the motherboard with a T10 screwdriver.

  10. TiVo Series 2 TCD540080 Motherboard Replacement: 手順 10、 3の画像 1 TiVo Series 2 TCD540080 Motherboard Replacement: 手順 10、 3の画像 2 TiVo Series 2 TCD540080 Motherboard Replacement: 手順 10、 3の画像 3
    • Use a pair of needle-nose pliers to make the two tabs parallel with the open slots.

    • It is recommended that you do not bend these back after putting unit back together as they may break after repeated use.

  11. TiVo Series 2 TCD540080 Motherboard Replacement: 手順 11、 1の画像 1
    • Pull the motherboard out towards the front of the TiVo unit, then pull up to remove it.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

5人の作成者と共同で作成されました。

Svyatoslav Markeyev

メンバー登録日: 04/16/10

135 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 33-79, Johann Spring 2010 Cal Poly, Team 33-79, Johann Spring 2010人のメンバー

CPSU-JOHANN-S10S33G79

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 4,411