メインコンテンツにスキップ

Thumby Battery Replacement

必要な工具と部品

    • Take out the wires from the JST SH connector

    • Use this guide to get to the battery.

    • Insert an opening pick in between the battery and the double-sided tape to take it out.

    • Desolder the 2 wires connecting the battery to the motherboard. Remember where the positive and negative terminals are soldered.

    • Take the new battery and solder it to the connectors, being mindful of the + and -

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

UnRedKnown

メンバー登録日: 04/20/24

208 ポイント

2のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 21

今までの合計 21