メインコンテンツにスキップ

Thrustmaster T3PA Cable Replacement

必要な工具と部品

  1. Thrustmaster T3PA Cable Replacement, Cable: 手順 1、 3の画像 1 Thrustmaster T3PA Cable Replacement, Cable: 手順 1、 3の画像 2 Thrustmaster T3PA Cable Replacement, Cable: 手順 1、 3の画像 3
    • Start by flipping it over, rest it on the pedals. make sure the wire is pointing towards the bottom. remove the 14 Screws on the back with a PH2 Phillips head screwdriver and carefully pop it off.

    • (DO NOT COMPLETELY PULL IT OFF BECAUSE OF WIRES.)

  2. Thrustmaster T3PA Cable Replacement: 手順 2、 2の画像 1 Thrustmaster T3PA Cable Replacement: 手順 2、 2の画像 2
    • Unplug the wire connected to the bottom (the one circled in the image).

  3. Thrustmaster T3PA Cable Replacement: 手順 3、 2の画像 1 Thrustmaster T3PA Cable Replacement: 手順 3、 2の画像 2
    • Once the bottom is separated, remove the glue holding the wire and pull it out.

終わりに

For reassembly, simply follow the steps in reverse.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

John.gmot

メンバー登録日: 05/31/23

270 ポイント

2のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 7

過去 7 日: 16

過去 30 日: 79

今までの合計 490