メインコンテンツにスキップ

はじめに

In this guide, you will learn how to open the ThinkPad X1 Carbon and replace the wireless card.

パーツ

パーツは指定されていません。

  1. Using the #0 Phillips screwdriver, loosen the seven cover screws.  they will not come all of the way out.
    • Using the #0 Phillips screwdriver, loosen the seven cover screws. they will not come all of the way out.

  2. Using the spudger pop the cover loose and remove.
    • Using the spudger pop the cover loose and remove.

  3. Use only plastic tools to disconnect battery cable
    • Use only plastic tools to disconnect battery cable

    • Slide battery connector in the direction if the arrow to disconnect.

    • You can leave the battery or remove it using the red circles for the screw locations.

  4. Remove screw holding the wireless card in place.
    • Remove screw holding the wireless card in place.

  5. Carefully remove the antenna cables and slide out the card in the direction of the arrow.
    • Carefully remove the antenna cables and slide out the card in the direction of the arrow.

    • The gray connector is on the top. The black connector is closer to the battery.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Mike

メンバー登録日: 2016年06月23日

1,698 ポイント

5のガイドは作成済み

チーム

iReconstruction iReconstruction人のメンバー

Business

1 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 8

過去 30 日: 42

今までの合計 4,083