メインコンテンツにスキップ

ThinkPad X1 Carbon Fingerprint Reader Replacement

必要な工具と部品

  1. ThinkPad X1 Carbon Fingerprint Reader Replacement, Fingerprint Reader: 手順 1、 1の画像 1
    • Unscrew the seven screws located on the back of the device.

  2. ThinkPad X1 Carbon Fingerprint Reader Replacement: 手順 2、 1の画像 1
    • Slide the plastic opening tool along the edge of the device to separate the keyboard tray.

  3. ThinkPad X1 Carbon Fingerprint Reader Replacement: 手順 3、 1の画像 1
    • Flip the device over and open it to lift the keyboard tray from the body of the device.

  4. ThinkPad X1 Carbon Fingerprint Reader Replacement: 手順 4、 1の画像 1
    • Use the plastic opening tool to gently release the ribbon cable attached to the keyboard.

    • You may now place the device off to the side. The rest of the repair takes place on the keyboard tray.

  5. ThinkPad X1 Carbon Fingerprint Reader Replacement: 手順 5、 1の画像 1
    • Locate the Fingerprint Reader and metal frame on the left side of the keyboard tray.

  6. ThinkPad X1 Carbon Fingerprint Reader Replacement: 手順 6、 1の画像 1
    • Unscrew the two silver screws to remove the metal frame.

  7. ThinkPad X1 Carbon Fingerprint Reader Replacement: 手順 7、 1の画像 1
    • Remove the ribbon cable connected to the board.

    • Remove and Replace the Fingerprint Reader board and metal frame.

    • This connection does not have a lock, please pull the ribbon away from the board. Do not attempt to lift the connection.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

6人の作成者と共同で作成されました。

Kirby Raines

メンバー登録日: 01/23/18

648 ポイント

4のガイドは作成済み

チーム

Western Carolina University, Team S1-G3, Virtue Spring 2018 Western Carolina University, Team S1-G3, Virtue Spring 2018人のメンバー

WCU-VIRTUE-S18S1G3

4 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 28

今までの合計 2,673