メインコンテンツにスキップ

このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。

必要な工具と部品

  1. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 1、 1の画像 1
    • Loosen the seven cover screws. They will not come out.

  2. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 2、 1の画像 1
    • Use a spudger to pop loose the cover and slide it off.

  3. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 3、 1の画像 1
    • Only use plastic to remove battery connector

    • Gently remove battery connector by pushing with the spudger in the direction of the arrow.

    • Remove four screws holding battery in place and remove battery.

  4. この手順は未翻訳です。 翻訳を手伝う。

    • The 4 perimeter screws also hold the tow audio speakers in place. And there is a 5th screw dead center of the battery. The battery cable is not easy to remove, nor is it easy to re-connect.

  5. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 5、 1の画像 1
    • Use your spudger to open the connector in the direction of the arrow. Carefully remove the ribbon cable

    • These connectors are very delicate. Use care when removing cables.

  6. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 6、 1の画像 1
    • Loosen screws and pull fan up and out of the case.

    • Be sure to apply heat sink paste when putting fan back on CPU

ゴール

9 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

Mike

メンバー登録日: 06/23/16

1,834 ポイント

5のガイドは作成済み

チーム

iReconstruction iReconstruction人のメンバー

Business

1 メンバー

11のガイドは作成済み

コメント 1 件

Great guide. I do recommend ordering the recommended tools, especially the spudger. There isn’t a lot of room to get the battery cable disconnected, so some of my other spudgers weren’t sturdy enough or wouldn’t have fit. My computer is working again and I didn’t have to pay a king’s ransom and wait 3 weeks (hey, I’m in Montana! I’m lucky to find anyone to fix a computer). Thanks!

marceec - 返信

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 13

過去 30 日: 125

今までの合計 12,478