The Internal Components of an Atari Lynx - iFixit 修理ガイド

はじめに

This guide will show you how to disassemble your Atari Lynx before diving into any problems.

必要な工具と部品

手順1 Atari Lynx

The Internal Components of an Atari Lynx, Atari Lynx: 手順 1、 1の画像 1

Before disassembling your Atari Lynx, be sure the device is powered off.
Remove any game in the console by opening the right latch and sliding the game to the right.

手順2

The Internal Components of an Atari Lynx: 手順 2、 1の画像 1

Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.
Pinch the rear panel with your fingers and lift away from the Atari.

手順3

The Internal Components of an Atari Lynx: 手順 3、 1の画像 1

Remove the battery panel by pinching the sides with your fingers and lifting it away from the Atari.
Be sure not to tear any wires attached to battery panel.

手順4

The Internal Components of an Atari Lynx: 手順 4、 1の画像 1

Remove the control panel by pinching the sides with your fingers and lifting it away from the Atari.
Be sure not to tear the speaker wire while removing the control panel.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

6人の作成者と共同で作成されました。

John Lopez

メンバー登録日: 01/27/14

443 ポイント

4のガイドは作成済み

+6 個以上のバッジ

チーム

Cal Poly, Team 1-42, Maness Winter 2014 Cal Poly, Team 1-42, Maness Winter 2014人のメンバー

CPSU-MANESS-W14S1G42

5 メンバー

16のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 93