The Claw Case Replacement

はじめに

If the clear plastic case on your claw device is broken or damaged, it can easily be replaced. This required the opening of the top cover of your claw device in order to access the clear plastic panels. Using this easy to follow replacement guide will make case replacement an easy task.

必要な工具と部品

手順1 Top Cover

The Claw Case Replacement, Top Cover: 手順 1、 1の画像 1

Place The Claw machine in the up-right position with the control knobs facing you.

編集

手順2

Turn The Claw machine upside-down placing the top cover on the surface of your work area.

編集

手順3

Remove all ten 6mm phillips #1 screws underneath the top cover using your #1 phillips head screwdriver.
It is helpful to choose a clear, well lit work space. There are multiple tiny screws that are easy to lose.

編集

手順4

Turn The Claw machine back to the upright position with controls facing you.

編集

手順5

Remove the top cover of The Claw machine.

編集

手順6

Remove the ten 6 mm phillips #1 screws from the top flange.

編集

手順7

Lift the flange upward and off to the side of the machine.
There is enough wire connecting the flange to the machine that you will not need to cut the wire. The flange can be moved off to the side of the machine while you are working.
Cutting or ripping out the wire will cause damage to the machine so try not to put much tension on the wire.