メインコンテンツにスキップ

The Beatles Rock Band Hofner Bass Back Plate Replacement

必要な工具と部品

  1. The Beatles Rock Band Hofner Bass Back Plate Replacement, Back Plate: 手順 1、 1の画像 1
    • Flip the bass onto its backside, so that the strummer is facing the table and the battery compartment is facing you.

    • Use a J1 Phillips head screwdriver to remove ten 5mm short screws.

    • Use a J1 Phillips head screwdriver to remove four 5mm long screws.

  2. The Beatles Rock Band Hofner Bass Back Plate Replacement: 手順 2、 1の画像 1
    • Flip the bass to the front, with the strummer and fret buttons facing you.

    • Use a J1 Phillips head screwdriver to remove two 10mm silver, short screws.

  3. The Beatles Rock Band Hofner Bass Back Plate Replacement: 手順 3、 2の画像 1 The Beatles Rock Band Hofner Bass Back Plate Replacement: 手順 3、 2の画像 2
    • Flip the bass on its back again, so that the strummer is facing down and the battery compartment is facing you.

    • Pull off the back whole panel so that the bass is now open.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Jacob

メンバー登録日: 01/25/17

601 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 8-4, Banghart Winter 2017 Cal Poly, Team 8-4, Banghart Winter 2017人のメンバー

CPSU-BANGHART-W17S8G4

3 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 10

今までの合計 810