はじめに

The stylus, which actually reads the record and transmits the signal, wears out over time. According to the TEAC manual for this device, that should be around 50 hours. Replacing or cleaning the stylus will help improve sound quality if done correctly, but should be done very carefully.

  1. Turn off record the player before making repairs. Unplug the record player.
    • Turn off record the player before making repairs.

    • Unplug the record player.

  2. Open the lid to access the turntable, arm, and stylus. Open the lid to access the turntable, arm, and stylus.
    • Open the lid to access the turntable, arm, and stylus.

  3. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. Press down on the front of the red stylus and pull forward to remove it from the arm.
    • Press down on the front of the red stylus and pull forward to remove it from the arm.

  5. Insert a new stylus by pushing it back up where the old one was, or, if necessary, clean the old one and replace likewise.
    • Insert a new stylus by pushing it back up where the old one was, or, if necessary, clean the old one and replace likewise.

ゴール

ある他の人がこのガイドを完成しました。

Charles Lockner

メンバー登録日: 2012年09月17日

103 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 2-61, Propen Fall 2012 Cal Poly, Team 2-61, Propen Fall 2012人のメンバー

CPSU-PROPEN-F12S2G61

4 メンバー

5のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 12

今までの合計 1,246