メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

If you have identified that your record player needs to have its motor replaced, this guide will show you how to safely do so. The motor is what controls the speed the record plays at, and may wear down or completely fail over time and with use. Replacement is easy if these steps are followed. Note that it is first important to complete the Disassembly Guide.

  1. Remove the three brass screws using a phillips #1 screwdriver. Remove the three brass screws using a phillips #1 screwdriver.
    • Remove the three brass screws using a phillips #1 screwdriver.

  2. Cut the wires that are attached to the motor.
    • Cut the wires that are attached to the motor.

    • Be sure to note the attachment point so that the wires can be reattached to the new motor.

  3. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  4. Using the phillips #1 screwdriver, remove the three screws that are holding the circular mounting bracket to the motor. Remove the circular mounting bracket from the motor. Remove the circular mounting bracket from the motor.
    • Using the phillips #1 screwdriver, remove the three screws that are holding the circular mounting bracket to the motor.

    • Remove the circular mounting bracket from the motor.

  5. Attach the mounting bracket to the new motor. Insert the new motor.
    • Attach the mounting bracket to the new motor.

    • Insert the new motor.

    • Flip the turntable over making sure the motor stays in place, and insert the screws underneath the turntable.

  6. The ends of the wires will need to be stripped before soldering.
    • The ends of the wires will need to be stripped before soldering.

    • Be extremely careful not to burn yourself while soldering.

    • Solder the wires cut wires onto the motor in the location recorded previously.

終わりに

To reassemble your device, follow these instructions in reverse order and complete the disassembly guide in reverse order.

Jake Hamilton

メンバー登録日: 2012年09月19日

134 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 2-61, Propen Fall 2012 Cal Poly, Team 2-61, Propen Fall 2012人のメンバー

CPSU-PROPEN-F12S2G61

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 5

今までの合計 1,380