メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

When your Taylor 3831S scale will not power on, it may be a simple fix and not that the Lithium battery is dead. Batteries need to be replaced periodically and this device will not work without one. This manual explains how to replace the CR2032 battery in the scale.

  1. Grab your scale and flip it over to get started. Remove the small screw on the battery housing cover using the Phillips #00 screwdriver.
    • Grab your scale and flip it over to get started.

    • Remove the small screw on the battery housing cover using the Phillips #00 screwdriver.

  2. Next, push the tab in and remove the battery covering. Next, push the tab in and remove the battery covering.
    • Next, push the tab in and remove the battery covering.

  3. Carefully remove the dead battery. Carefully remove the dead battery. Carefully remove the dead battery.
    • Carefully remove the dead battery.

  4. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る
  5. With the indented side facing the scale, secure the new battery in the battery housing.
    • With the indented side facing the scale, secure the new battery in the battery housing.

  6. Once the battery is secured, replace the battery cover.
    • Once the battery is secured, replace the battery cover.

  7. Using the Phillips #00 screwdriver once again, replace the screw that secures the covering.
    • Using the Phillips #00 screwdriver once again, replace the screw that secures the covering.

  8. Now power on the scale.
    • Now power on the scale.

ゴール

Arika Lewis

メンバー登録日: 2020年04月14日

148 ポイント

1ガイドが承認済み

チーム

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 2

過去 7 日: 6

過去 30 日: 15

今までの合計 105