メインコンテンツにスキップ

SwagTron T1 Back Panels Replacement

必要な工具と部品

  1. SwagTron T1 Back Panels Replacement, Back Panels: 手順 1、 1の画像 1
    • Ensure that the SwagTron is off.

    • Turn the SwagTron upside down to see the underside.

  2. SwagTron T1 Back Panels Replacement: 手順 2、 3の画像 1 SwagTron T1 Back Panels Replacement: 手順 2、 3の画像 2 SwagTron T1 Back Panels Replacement: 手順 2、 3の画像 3
    • Unscrew the eighteen 10mm screws that secure the back panels using a Phillips #2 screwdriver.

    • The screws are tightly in place. It will take effort to screw them out.

    • The panel is still attached to the SwagTron by wires that go to the motherboard.

    • Carefully lift the panels off

  3. SwagTron T1 Back Panels Replacement: 手順 3、 3の画像 1 SwagTron T1 Back Panels Replacement: 手順 3、 3の画像 2 SwagTron T1 Back Panels Replacement: 手順 3、 3の画像 3
    • Follow the wires from the panels to the motherboard.

    • You may need to cut any zip ties that are holding the wires together.

    • There is one connection on the battery side and three on the other side that must be removed.

    • These connections may be difficult to remove. Try to securely press the connection and pull firmly.

    • Your back panels are now completely removed.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Adrian Abarca

メンバー登録日: 04/18/17

360 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team S17-G5, Banghart Spring 2017 Cal Poly, Team S17-G5, Banghart Spring 2017人のメンバー

CPSU-BANGHART-S17S17G5

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 660