はじめに

Use this guide to remove the exhaust pipe from your Suzuki FA50 moped.

Use a #2 Phillips screwdriver to remove the heat shield from the muffler.
  • Use a #2 Phillips screwdriver to remove the heat shield from the muffler.

コメントを追加する

There are two 10 mm hex nuts attaching the muffler to the engine. Make sure you remove both of them before proceeding to the next step.
  • There are two 10 mm hex nuts attaching the muffler to the engine. Make sure you remove both of them before proceeding to the next step.

  • Use a 10 mm socket wrench to unscrew the two hex nuts.

コメントを追加する

Use a 12 mm socket wrench to unscrew the third and final hex nut that holds the muffler in place.
  • Use a 12 mm socket wrench to unscrew the third and final hex nut that holds the muffler in place.

  • Make sure to support the muffler with your hand while removing this nut, otherwise it may just fall to the floor.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Miroslav Djuric

142,035 ポイント

251のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 27

今までの合計 5,868