Supersonic Matrix SC-91MID Screen Replacement - iFixit 修理ガイド

はじめに

This replacement guide will offer step-by-step information on how to replace a Supersonic Matrix SC-91MID screen

必要な工具と部品

手順1 Screen

Supersonic Matrix SC-91MID Screen Replacement, Screen: 手順 1、 2の画像 1

Supersonic Matrix SC-91MID Screen Replacement, Screen: 手順 1、 2の画像 2

Place the plastic opening tool between the screen and the main component and pry open between the two. Once removed place the main component in a safe place and continue working on the screen section (highlighted in red).
Be aware of the wires when removing the display screen from the main component (highlighted in orange)

手順2

Supersonic Matrix SC-91MID Screen Replacement: 手順 2、 3の画像 1

Supersonic Matrix SC-91MID Screen Replacement: 手順 2、 3の画像 2

Supersonic Matrix SC-91MID Screen Replacement: 手順 2、 3の画像 3

Place the plastic opening tool between the metal screen plate and the black front casing.
There are small clips where the plastic opening tool can be placed to help pry the screen from the casing.

手順3

Supersonic Matrix SC-91MID Screen Replacement: 手順 3、 3の画像 1

Supersonic Matrix SC-91MID Screen Replacement: 手順 3、 3の画像 2

Supersonic Matrix SC-91MID Screen Replacement: 手順 3、 3の画像 3

Continue to slide the opening tool along the length of the casing until there is a clear separation between the screen and the cover (as shown in the third image).

手順4

Supersonic Matrix SC-91MID Screen Replacement: 手順 4、 1の画像 1

Once there is a clearing, carefully remove the screen from the black cover. You now have separated the screen from the tablet device and and are now ready to replace screen.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

6人の作成者と共同で作成されました。

Norikuni Nishikawa

メンバー登録日: 03/31/18

139 ポイント

1ガイドが承認済み

チーム

IUPUI, Team S1-G1, Wilson Spring 2018 IUPUI, Team S1-G1, Wilson Spring 2018人のメンバー

IUPUI-WILSON-S18S1G1

5 メンバー

6のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 6

今までの合計 269