メインコンテンツにスキップ

はじめに

This guide will show you how to open up your Super Nintendo.

パーツ

パーツは指定されていません。

  1. Remove the six screws located on the underside of the system using the Gamebit 4.5mm screwdriver.
    • Remove the six screws located on the underside of the system using the Gamebit 4.5mm screwdriver.

  2. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  3. Carefully flip the unit back over. Locate the seam. Lift and separate the upper half of the case from the lower half of the case. Locate the seam. Lift and separate the upper half of the case from the lower half of the case.
    • Carefully flip the unit back over.

    • Locate the seam. Lift and separate the upper half of the case from the lower half of the case.

まとめ

To reassemble your device, follow these instructions in reverse order.

12 の人々がこのガイドを完成させました。

Cameron Deines

メンバー登録日: 2010年10月05日

589 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 4-47, Amido Fall 2010 Cal Poly, Team 4-47, Amido Fall 2010人のメンバー

CPSU-AMIDO-F10S4G47

4 メンバー

10のガイドは作成済み

コメント1件

Hi, my name is Orlando, I'm writting of Perú, I have a question:

I can´t put the hinge of the top of that above part.

Please, can you help me, my mail is orla.davila12@gmail.com

Orlando Dávila Vizconde - 返信

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 21

過去 30 日: 127

今までの合計 19,892