メインコンテンツにスキップ

Sun King Solo Solar Lantern Hand Strap Replacement

必要な工具と部品

  1. Sun King Solo Solar Lantern Hand Strap Replacement, Locate and Remove the Screws: 手順 1、 1の画像 1
    • Place the lamp LED side down on a clean workspace.

    • Remove the screws holding the casing together using a Phillips #1 Screwdriver.

  2. Sun King Solo Solar Lantern Hand Strap Replacement, Separate the Device: 手順 2、 1の画像 1
    • Gently pull the two halves of the lamp apart.

  3. Sun King Solo Solar Lantern Hand Strap Replacement, Remove Strap: 手順 3、 1の画像 1
    • Remove both ends of the strap from the orange casing by pulling up.

  4. Sun King Solo Solar Lantern Hand Strap Replacement, Replace the Strap: 手順 4、 1の画像 1
    • Insert the ends of the new strap into the strap housing on both sides of the orange component.

    • Either strap housing (inner or outer) can be used to adjust the strap length.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Anna

メンバー登録日: 10/23/14

595 ポイント

4のガイドは作成済み

チーム

Michigan Tech, Team 1-3, Lauer Fall 2014 Michigan Tech, Team 1-3, Lauer Fall 2014人のメンバー

MTU-LAUER-F14S1G3

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 300