メインコンテンツにスキップ

Starbucks Barista Ready Light Replacement

必要な工具と部品

  1. Starbucks Barista Ready Light Replacement, Ready Light: 手順 1、 2の画像 1 Starbucks Barista Ready Light Replacement, Ready Light: 手順 1、 2の画像 2
    • Unscrew the 6 screws from the back panel.

    • Remove the back panel.

  2. Starbucks Barista Ready Light Replacement: 手順 2、 3の画像 1 Starbucks Barista Ready Light Replacement: 手順 2、 3の画像 2 Starbucks Barista Ready Light Replacement: 手順 2、 3の画像 3
    • Locate the ready light.

    • Gently push the fixture against the Barista wall.

    • Pull the fixture straight up to release it.

    • Note: The fixture works as a spring.

    • Note: The green cover from the front panel will "pop" off. Do not lose the green cover.

    • Disconnect the wire lead connectors.

    • Remove the ready light unit (fixture).

  3. Starbucks Barista Ready Light Replacement: 手順 3、 1の画像 1
    • Replace the old LED with a new LED.

    • To put back, match the green cover to the slot of the LED fixture, then slide the fixture down against the barista wall.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

6人の作成者と共同で作成されました。

David

メンバー登録日: 01/28/11

739 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 4-42, Regan Winter 2011 Cal Poly, Team 4-42, Regan Winter 2011人のメンバー

CPSU-REGAN-W11S4G42

4 メンバー

5のガイドは作成済み

4 件のコメント

Youth and sports for

Rich Ridout - 返信

Ttuii addinsists

Rich Ridout - 返信

Where can I get a new LED bulb?

Paula - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 19

今までの合計 6,088