メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

This guide will you show the proper steps to change the strings on your Stagg Electro-Acoustic Guitar. For this guide you will need a guitar string winder and cutter, as well as your preferred brand of guitar string. This guide will only show how to replace one string but can be repeated to change all of them.

ツール

パーツ

  1. Place the string winder on the tuning key.
    • Place the string winder on the tuning key.

  2. Wind up the string winder counter-clockwise to loosen the strings.
    • Wind up the string winder counter-clockwise to loosen the strings.

  3. With the string clipper, clip the string under the neck of the guitar.
    • With the string clipper, clip the string under the neck of the guitar.

  4. Unwind the string from the machine head and remove it.
    • Unwind the string from the machine head and remove it.

  5. With the string winder pop the string peg out of its hole.
    • With the string winder pop the string peg out of its hole.

  6. Place the colored circle end of the string in the peg hole.
    • Place the colored circle end of the string in the peg hole.

  7. Put the peg in the hole with the string.
    • Put the peg in the hole with the string.

    • Pull the string while pushing the pin in.

  8. Precut the other side of the string by one and a half machine heads.
    • Precut the other side of the string by one and a half machine heads.

  9. Thread the string through the peg.
    • Thread the string through the peg.

    • Wind the string clockwise from top to bottom with the string winder.

    • Do not overlap the string when winding it.

終わりに

Repeat steps for each string.

Imanuel Martinez

メンバー登録日: 2020年09月15日

169 ポイント

1ガイドが承認済み

チーム

University of Memphis, Team S3-G10, Willis Fall 2020 University of Memphis, Team S3-G10, Willis Fall 2020人のメンバー

Community

1 メンバー

1のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 25