メインコンテンツにスキップ

Spin Master Hatchimal Draggle Speaker Replacement

必要な工具と部品

  1. Spin Master Hatchimal Draggle Speaker Replacement, Plastic Wing Replacement: 手順 1、 1の画像 1
    • lay the Hatchimal on its side.

  2. Spin Master Hatchimal Draggle Speaker Replacement: 手順 2、 1の画像 1
    • Using the plastic opening tool, push in on the purple clip.

  3. Spin Master Hatchimal Draggle Speaker Replacement: 手順 3、 1の画像 1
    • Pull the wing off of the hatchimal.

    • The wing should come off with little resistance.

  4. Spin Master Hatchimal Draggle Speaker Replacement, Fur Replacement: 手順 4、 2の画像 1 Spin Master Hatchimal Draggle Speaker Replacement, Fur Replacement: 手順 4、 2の画像 2
    • Cut the fur retaining zip-tie with a pair of scissors.

  5. Spin Master Hatchimal Draggle Speaker Replacement: 手順 5、 2の画像 1 Spin Master Hatchimal Draggle Speaker Replacement: 手順 5、 2の画像 2
    • Lift the fur up until it can't go further.

  6. Spin Master Hatchimal Draggle Speaker Replacement: 手順 6、 3の画像 1 Spin Master Hatchimal Draggle Speaker Replacement: 手順 6、 3の画像 2 Spin Master Hatchimal Draggle Speaker Replacement: 手順 6、 3の画像 3
    • Use the spudger tool to push up on the black clip to free it.

    • Pull the clip out.

  7. Spin Master Hatchimal Draggle Speaker Replacement: 手順 7、 3の画像 1 Spin Master Hatchimal Draggle Speaker Replacement: 手順 7、 3の画像 2 Spin Master Hatchimal Draggle Speaker Replacement: 手順 7、 3の画像 3
    • Lift fur up to reveal the next set of clips.

    • Insert a spudger to push up on the black clip to free it.

    • Pull out the clip.

  8. Spin Master Hatchimal Draggle Speaker Replacement: 手順 8、 2の画像 1 Spin Master Hatchimal Draggle Speaker Replacement: 手順 8、 2の画像 2
    • Lift the fur up and over the Hatchimals Head.

    • Remove the six 12mm Phillips #00 screws from then body.

  9. Spin Master Hatchimal Draggle Speaker Replacement: 手順 9、 2の画像 1 Spin Master Hatchimal Draggle Speaker Replacement: 手順 9、 2の画像 2
    • Pull the casing apart.

    • Remove the yellow speaker cable.

  10. Spin Master Hatchimal Draggle Speaker Replacement: 手順 10、 3の画像 1 Spin Master Hatchimal Draggle Speaker Replacement: 手順 10、 3の画像 2 Spin Master Hatchimal Draggle Speaker Replacement: 手順 10、 3の画像 3
    • Remove the three 7mm Phillips #00 screws from the head.

    • Remove the wheel base and the circuit board carefully not to damage the spring.

  11. Spin Master Hatchimal Draggle Speaker Replacement: 手順 11、 2の画像 1 Spin Master Hatchimal Draggle Speaker Replacement: 手順 11、 2の画像 2
    • Push the six black fur clips out using the spudger.

    • Remove the fur completely.

  12. Spin Master Hatchimal Draggle Speaker Replacement, Speaker Replacement: 手順 12、 1の画像 1
    • Gently pull the yellow speaker cord from circuit board. There will be little resistance.

  13. Spin Master Hatchimal Draggle Speaker Replacement: 手順 13、 2の画像 1 Spin Master Hatchimal Draggle Speaker Replacement: 手順 13、 2の画像 2
    • Remove the two 7mm Philips #00 screws from the head.

  14. Spin Master Hatchimal Draggle Speaker Replacement: 手順 14、 2の画像 1 Spin Master Hatchimal Draggle Speaker Replacement: 手順 14、 2の画像 2
    • Pull the speaker cover off.

    • Remove the speaker.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Hector Lopez

メンバー登録日: 02/14/18

251 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team S1-G5, Nance Spring 2018 USF Tampa, Team S1-G5, Nance Spring 2018人のメンバー

USFT-NANCE-S18S1G5

3 メンバー

10のガイドは作成済み

2 件のコメント

Where can I get a new speaker?

Jeff - 返信

Same question . Where to get a matching speaker. Ebay is full of similar 23mm speakers. But which one to get? My Hatchimal speaker says 25w. I find it hard to believe it is 25 watts. The ones on ebay are 1 watt, 2 watt or half watt.

kewrock - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 8

今までの合計 1,750