修理を始めるには コミュニティ ストア

Spin Master Boxer Wheel Gears Replacement

はじめに

If Robot fails to move, the gears inside of wheels may need to be replaced. Follow this guide for instructions on how to access and replace gears. This can be applied to both sets of wheels. You will need a Phillips #00 Screwdriver and tweezers.

必要な工具と部品

  1. Spin Master Boxer Wheel Gears Replacement, Robot Screen: 手順 1、 1の画像 1

    • Set Spin Master Boxer on your workspace so that the bottom panel faces upwards.

    編集

  2. Spin Master Boxer Wheel Gears Replacement: 手順 2、 1の画像 1

    • Using a Phillips #00 screw driver, unscrew the four 4mm screws in each corner of the bottom panel.

    編集

  3. Spin Master Boxer Wheel Gears Replacement: 手順 3、 1の画像 1

    • Carefully remove the bottom panel of the Spin Master Boxer by lifting up, away from the main body of robot.

    編集

  4. Spin Master Boxer Wheel Gears Replacement: 手順 4、 2の画像 1 Spin Master Boxer Wheel Gears Replacement: 手順 4、 2の画像 2

    • While holding onto the axels of the wheels, gently pull the top panel of the robot away from its body.

    • Be aware when removing the panel that multiple wires connect it to the body of the Spin Master Boxer.

    編集

  6. Spin Master Boxer Wheel Gears Replacement: 手順 5、 1の画像 1

    • Remove the plastic screen from the body of the robot. It should come off easily as it is not attached by anything.

    編集

  7. Spin Master Boxer Wheel Gears Replacement, Robot Wheel Gears: 手順 6、 1の画像 1

    • Place robot on back so that the sensors are facing up.

    編集

  8. Spin Master Boxer Wheel Gears Replacement: 手順 7、 2の画像 1 Spin Master Boxer Wheel Gears Replacement: 手順 7、 2の画像 2

    • Gently separate the left set of wheels from the inner portion of the circuit board, by gripping the wheels and pulling them away from main body of robot.

    • There are wires attached to each set of wheels, so be careful not to rip them apart.

    • Repeat the process for the right set of wheels.

    編集

  9. Spin Master Boxer Wheel Gears Replacement: 手順 8、 2の画像 1 Spin Master Boxer Wheel Gears Replacement: 手順 8、 2の画像 2

    • Use the Phillips #00 Screwdriver to remove the 3mm screw that connect the black wheels to the gears.

    • You will have to go through the black wheel to unscrew some of the screws.

    編集

  10. Spin Master Boxer Wheel Gears Replacement: 手順 9、 3の画像 1 Spin Master Boxer Wheel Gears Replacement: 手順 9、 3の画像 2 Spin Master Boxer Wheel Gears Replacement: 手順 9、 3の画像 3

    • Grip wheel, and gently pull up, to separate white gear casing into its front and back panel.

    編集

  11. Spin Master Boxer Wheel Gears Replacement: 手順 10、 1の画像 1

    • Using tweezers, grip defective gear, and pull up and out of gear system to replace.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Lauren Roide

メンバー登録日: 04/16/19

739 ポイント

5のガイドは作成済み

バッジ: 10

+7 個以上のバッジ

チーム

Cal Poly, Team S1-G1, Maness Spring 2019 Cal Poly, Team S1-G1, Maness Spring 2019人のメンバー

CPSU-MANESS-S19S1G1

4 メンバー

10のガイドは作成済み

3 件のコメント

This is super useful guide and picture are clear for the steps. Will be excellent to know where to buy these gears replacements?

Javier Perez - 返信

Hello. Thé motor seems to be broken. Do you Knowles ils spec to buy à New one.

Sorry, im french...

Tanks.

Jerome Carbonneaux - 返信

Do you know its spec to buy a new one?

Realy sorry...

Jerome Carbonneaux - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 16

今までの合計 3,626