Heat to soften back cover sticker.
  • Heat to soften back cover sticker.

  • Place suction cup and pull open a gap.

コメントを追加する

Insert into guitar pick, slide and cut the sticker. Finally, remove the back cover.
  • Insert into guitar pick, slide and cut the sticker. Finally, remove the back cover.

コメントを追加する

  • Remove the battery.

コメントを追加する

  • Twist off two screws here.

  • Release all the connectors connecting with loudspeaker assembly.

  • Remove vibrator securing bracket.

コメントを追加する

  • Remove loudspeaker assembly cover and assembly itself.

コメントを追加する

  • Pry up the MIC. It's a part of the main flex.

  • Release the connector with LCD screen flex and the connector with motherboard.

コメントを追加する

  • Push the upper power button & volume button flex branch bracket as the direction marked, and then remove it easily.

  • Pry up the lower shutter button flex branch bracket carefully. It's different from the upper one, it's come with the flex together but the upper one not.

コメントを追加する

  • Get the flex from the sticker underneath carefully.

  • And then, take the power button & volume button flex branch out from the slot.

  • Finally, remove the whole main flex.

Is it ok to remove the small copper stickers under the flex?

Miguel Damayo - 返信

まとめ

To reassemble your device, follow these instructions in reverse order.

9 の人々がこのガイドを完成させました。

Sophia

メンバー登録日: 2014年03月25日

40,274 ポイント

62のガイドは作成済み

Hello

I changed my power, but I felt the power button action do you think the problem of what can be

Thanks

mehdi ghanbarian - 返信

Is it ok to remove the small copper stickers under the flex?

Miguel Damayo - 返信

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 16

過去 30 日: 84

今までの合計 6,541