メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

The back of the phone can become worn or cracked with continued use. This guide will show you how to remove the back cover of the device.

  1. Heat along the edges of the back cover  using a heat gun to soften the glue.
    • Heat along the edges of the back cover using a heat gun to soften the glue.

  2. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る
  3. Attach the small suction cup to the back cover near the bottom of the phone.
    • Attach the small suction cup to the back cover near the bottom of the phone.

    • Pull up on the suction cup and insert the plastic opening tool in between the back cover and the rest of the phone.

  4. Move the spudger around the edge of the back cover to separate it from the black adhesive. Separating the back cover from the rest of the phone ruins the adhesive which makes it no longer waterproof.
    • Move the spudger around the edge of the back cover to separate it from the black adhesive.

    • Separating the back cover from the rest of the phone ruins the adhesive which makes it no longer waterproof.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Kevin Bergstrom

メンバー登録日: 2017年09月21日

367 ポイント

3のガイドは作成済み

チーム

Washington State, Team S4-G1, Phelps-Hillen Fall 2017 Washington State, Team S4-G1, Phelps-Hillen Fall 2017人のメンバー

WSU-PHELPS-HILLEN-F17S4G1

6 メンバー

9のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 18

今までの合計 1,667