はじめに

If your phone's motherboard needs to be replaced, this guide will assist you through the replacement steps.

Set the phone screen down on a clean flat, surface.
  • Set the phone screen down on a clean flat, surface.

  • Insert the plastic opening tool into the groove located between the body of the phone, and the back plate protecting the battery.

  • Open the back of the device by prying around the sides of the back panel using the plastic opening tool.

コメントを追加する

Insert the plastic opening tool in between the battery and the phone body.
  • Insert the plastic opening tool in between the battery and the phone body.

  • Pry up on the side of battery, and remove it.

コメントを追加する

Remove the bottom cover of the phone using the plastic opening tool.
  • Remove the bottom cover of the phone using the plastic opening tool.

コメントを追加する

Remove the five 5.47mm and one 5.18mm Torx head screws using a Phillips #0 screwdriver.
  • Remove the five 5.47mm and one 5.18mm Torx head screws using a Phillips #0 screwdriver.

コメントを追加する

Carefully remove the back cover using the plastic opening tool.
  • Carefully remove the back cover using the plastic opening tool.

コメントを追加する

Pry up on the right side of the motherboard using the plastic opening tool.
  • Pry up on the right side of the motherboard using the plastic opening tool.

コメントを追加する

Carefully detach the flex cable using a pair of tweezers.
  • Carefully detach the flex cable using a pair of tweezers.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Bader

メンバー登録日: 2014年10月07日

545 ポイント

4のガイドは作成済み

チーム

USF Tampa, Team 7-2, Leahy Fall 2014 USF Tampa, Team 7-2, Leahy Fall 2014人のメンバー

USFT-LEAHY-F14S7G2

4 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 22

今までの合計 2,427