はじめに

How to replace broken Digitizer Glass on Sony XPERIA E.


Please SUBSCRIBE to my channel ツ

ビデオの概要

  1. Switch-off the phone. Remove the battery. Remove the battery.
    • Switch-off the phone.

    • Remove the battery.

  2. The small bottom bezel is held by 2x locking clips. Preferably use plastic tools for disassembling. Preferably use plastic tools for disassembling.
    • The small bottom bezel is held by 2x locking clips.

    • Preferably use plastic tools for disassembling.

  3. There are 4x silver screws and 3x black screws. The rear cover is held by 5x locking clips. Two of them, at the bottom side are more hard for unlocking. You can use a screwdriver or other metal tool to unlock them.
    • There are 4x silver screws and 3x black screws.

    • The rear cover is held by 5x locking clips.

    • Two of them, at the bottom side are more hard for unlocking. You can use a screwdriver or other metal tool to unlock them.

  4. Remove the back cover. With a plastic tool disconnect one by one: LCD Display flex cable
    • Remove the back cover.

    • With a plastic tool disconnect one by one:

      • LCD Display flex cable

      • Touchscreen flex cable

      • Menu Buttons Board flex cable

      • Coaxial Wire Antenna cable

  5. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  6. Carefully remove the main board. Carefully remove the main board.
    • Carefully remove the main board.

  7. Disconnect the other side of the flex cable and remove the Home Buttons board. Unstick the camera button. Unstick the camera button.
    • Disconnect the other side of the flex cable and remove the Home Buttons board.

    • Unstick the camera button.

  8. The touch screen is stuck to the frame with double side adhesive tape. By using plastic tools gently start separating. At the bottom is glued on firmly because the bonded surface is larger.
    • The touch screen is stuck to the frame with double side adhesive tape.

    • By using plastic tools gently start separating.

    • At the bottom is glued on firmly because the bonded surface is larger.

    • Use a hot air to make separating more easy and safety.

  9. With a plastic tool, carefully separate the LCD display from the touch screen. Clear the touchscreen from the old adhesive tape. Clear the touchscreen from the old adhesive tape.
    • With a plastic tool, carefully separate the LCD display from the touch screen.

    • Clear the touchscreen from the old adhesive tape.

  10. Install the new LCD into the frame and put adhesive tape. Be careful not to cover the holes (for the speaker, menu buttons etc.). Install the Touchscreen. Be careful not to cover the holes (for the speaker, menu buttons etc.). Install the Touchscreen.
    • Install the new LCD into the frame and put adhesive tape.

    • Be careful not to cover the holes (for the speaker, menu buttons etc.). Install the Touchscreen.

  11. To reassemble your device, follow these instructions in reverse order.
まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

ZFix

メンバー登録日: 2013年12月09日

162,554 ポイント

304のガイドは作成済み

チーム

Master Techs Master Techs人のメンバー

Community

280 メンバー

784のガイドは作成済み

統計データを表示:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 12

今までの合計 4,680